1948-1979 Ford Truck Spare Parts Catalog

Ford Truck Spare Parts Catalog

To Our Ford Truck Enthusiasts
Owning a truck says a lot about a person, and owning a clasic Ford truck says even more. It means that you appreciate the craftsmanship and quality that went into every Ford truck, and you want to carry it on for generations to come.

With that in mind, MAC's has redesigned our Ford truck parts catalog-one of the most extensive catalogs in the business. The full color pages and images for every part (or part “family”) will make it easier to find almost anything you’re looking for.

You can order easily by using our Web site www.macsautoparts.com, fax or mail your order using an order form in the back of the catalog, or call 800-777-0948 to speak with one of our dedicated customer service representatives.

Hog Ring Pliers & Rings
We offer high quality hog rings & pliers, for those who are skilledat installing their own seat covers. However, if you have neverdone this job before, we recommend that you take our premium seat cover sets to a professional trim installer, for best results.Their many years of experience have taught them countless techniques for getting the proper fit, without unnecessarywrinkles, sags, or other little imperfections. So unless you are experienced at installing reproduction automotive seat covers,check the yellow pages for a professional installer near you.

F1 thru F8, F100 thru F750 (continued)
When you display your car with doors opened, you want everyone to see that your door panels compliment your interior trim. Combine a great attention to detail, using correct grain vinyl& colors matched to our other interior products & you’ll agreethat our new reproduction door panels look just like the originals did on the showroom floor. For a fast & easy way to make your car look terrific, install a pair of our beautiful door panels today!Note: armrests & any mouldings need to be transferred fromyour original panels on all of these.

Door Trim Panels
F1 thru F8, F100 thru F750 All panels sold as pairs. No door panels were offered from the factory in 1951 or 1952. The door panels listed below are an aftermarket style made of colored panel board. We can offerscrews, our SOHSMS082, or button head clips, our A46126, tohelp with your installation as no attaching hardware is supplied. Whichever style you choose will require you to drill holes in the door panels & your trucks doors. Trim clips required for installationare sold below.

Kick Panel Trim Strips
Finish off the edge of your kick panels with this neat piece ofsteel trim. It can be painted body color & has pre-drilled slots for easy installation.

Stop in & visit ournew showroomat 6150 Donner Road in Lockport, New York(minutes from Buffalo), 8 a.m.–5:30 p.m. Monday–Friday or 8 a.m.–12:30 p.m.on Saturday. You can check out some cars, pick up your order, or just say hello.

When it comes to restoring & maintaining your classic truck, we know you have choices, so we thank you for choosing MAC's: your one stop source for quality parts & accessories for your 1909–1970s Ford & Mercury,

Made of a non-slip, soft & pliable yet strong,PVC material, these fender grippers will stop you from worrying about another tool slipping
off your classic truck.See page 292.

Icon Descriptions
We have added these icons throughout ourcatalog where necessary & are used to denote any additional information you need about our parts.We want your ordering experience with us to be as pleasant as possible.

Headliner Kits
The first three headliner kits are the exact size for 1948-50 pickups. These kits will fit 1951-52 pickups if you make the back window cut-out larger. They include: roof, left & right sides ofback windows, center below back window, left & right side below back window & one pair of under-dash kick panels, totaling 8pieces, plus all the screws, washers & clips necessary.

Before you install your new headliner, consider updating your cab insulation. We carry easy-to-install kits that offer the latest technology for insulating your vintage cab. Simply follow the detailed instructions & you are on your way to better heating, air conditioning & stereo performance. See pages 14-15.

Bench Seat Cover Sets
MAC's is now offering bench seat upholstery for 1961 thru 1979F-series trucks. Made using original patterns, they will fit your factory bench seat perfectly. Choose from all vinyl or vinyl with a woven cloth insert, available in up to 10 different colors, to match almost any paint scheme. Even though they are not an exactmatch of the original, they will improve the looks of your cab. Soif your seat cover is worn, starting to rip, or just plain ugly, giveus a call & order your new set today!

Door Arm Rests
Armrests are just about always split &cracked with age, with the grain pattern worn smooth from years of constant contact. Put brand new armrests on your door panels for that brand-new-car look, as well as comfort! Our reproduction 1948-50 armrests consistof three separate pieces; a plastic base, a molded rubber pad & a metal bracket. The bases are exact reproductions of the originals with every curve & detail included. The metal bracket attaches the pad to the base & that assembly attaches to the door panel, all with brand new hardware. Finally, the molded rubber pad is shipped to you without any covering so you can have it upholstered to matchthe rest of your interior.

Door  Storage Compartment
Ford recognized the lack of storage space in their pickup trucks& created this neat accessory back in 1961. Designed to fit inthe lower part of the door, you just remove the access panel &slide these storage compartments in. They fit perfectly & with the chrome plated surround & factory correctmounting screws, theylook great too.

Interior Trim Screw Sets
Get rid of those mismatched, rusted & stripped screws. A cover sheet is provided to show the correct location for each bagged &tagged screw. Make your interior hardware brand new with ourtrim screw sets!

Windlace
Please measure your original windlace so you get as much as you need. We suggest 10 feet, but we can cut the windlace to any length you require. Price shown is per foot, order as required.

If you haven't already installed seat belts in your classic ride, we highly recommend it. Our universal style seat belts feature a chrome lift latch & are available in 10 colors to match almost any interior. Sold per passenger, each belt includes washers, bolts, nuts & basic instructions on how to install. The 60" size is standard, for a little extra breathing room, order the 74" length.These seat belts do not include instructions on where to mount. Proper installation is at the risk & responsibility of the customer.

New Style Sun Visors (2 required)
In addition to our line of original colored panelboard sun visors for 48-66, we now have brand new, all vinyl padded visorsavailable. These sun visors are beautifully crafted in a variety of colors to satisfy almost any interior color scheme. As with all of MAC's products, you can be assured of high quality & a correctfit, so make your choice & call us today.

Truck Carpets
MAC's premium carpet sets are simply the finest carpets money can buy. Made with only the highest quality materials, they are just like the O.E.M. carpets installed at the factory. These color-fast carpets are a top quality loop pile or 100% nylon cut pile for originality & providingsuperior wear resistance & durability. Flip the carpet over & you’ll find 36 oz. Jute backing is applied to keep down road noise & help insulate your interior. A color coordinated heel pad is standard & since the dimmer switch wasn’t always in the exact same place, an easy to install dimmer switch grommet is provided separately. Unlike the originals, our carpets cover the entire cab floor so you get a more finishedlook.

Carpeted  F loor Mats
Using the same loop pile material & all of the same colors as our carpets they’ll match beautifully. The grip-lock non-skid backingwill keep them in place. Available with or without an embroidered logo. All colors available can be seen on the previous page.Logo mats areNOTreturnable.

If your truck's glass is scratchy, cracked or just plain missing, MAC's can help. All of our glass is AS1 clear safety glass cut from original patterns for a flawless fit. Crystal clear glass is just a phone call away! Unfortunately, because of the risk of damage, MAC's will not ship glass out of the contiguous United States.

Belt Weatherstrips
Belt weatherstripping is what keeps water & other debris fromgoing down into the door cavity & rusting out the door bottom.After 40+ years of opening & closing the windows these weatherstrips are usually pretty worn out. Get rid of the rattles &stop the leaks - replace them now using our economical kits!

Vent Window Seals & Parts
Vent Bar Channel Assemblies
The front of your door glass slides up & down in this channel.When it gets worn your door glass moves back & forth & rattlesall day long. Install a new vent bar channel or vent bar channel insert & your ears won’t believe the difference! These are not universal vent bar channel assemblies. All brackets are installed,as is the back-of-vent-window seal, just like the originals.

Vent Window Seals
Because they are used quite often, vent window seals are usually so worn that they leak water &air. Keep water from staining your door panels &stop that annoying whistling at highway speeds by replacing those vent window seals today, you’ll be happy you did. To seal the whole vent you will need to purchase both the window seal & the back edge seal listed on the next page.Back edge of vent window seals sold separately & listed below.

Rubber Floor Mats
These US-made rubber mats are the original design & have openings cut into them to fit pedals. Note: over time theoriginal molds have developed small flaws. Currently the sole manufacturer will not make new molds. Most customers findthese mats to be acceptable, but MAC's will accept any returns,but unfortunately has nothing different to offer at this time.

Insulation
MAC's carries insulation for every budget & level of restoration.We have several types sold in bulk pieces that are perfectfor the economy minded restorer. They must be cut to fit, butcan be used in most any application. The next steps up aresound deadener & heat shield die-cut kits. Being pre-cut, thesekits greatly simplify the installation process. Finally, for theultimate in insulation, the absolute best at damping road noise,all sold in kits that are pre-cut for every application, we have AcoustiSHIELD.

Firewall Insulation
A well-insulated firewall, transmission tunnel & floor pans are a must for any restoration or street rod. The V700770X insulation sheet, with its space-age reflective foil bonded on both sides, is rated R18.3 (700° F heat resistance). Can also be used in kick panels, inside door panels & under carpeting.

Dynamat® Sound Insulation
For years, we have been selling the original Dynamat & can boast hundreds of satisfied customers. We are now proud tooffer the next generation of Dynamat sound deadeners: Xtreme.Xtreme is a step up from the original formula & is Dynamat’sbest product at controlling vibration. It damps 4 times as muchas the original Dynamat &, as an added bonus, it weighs 50%less. It is available in conveniently sized 18" x 32" sheets & with peel & stick application; it goes on quickly & easily. Do yourself a favor & order some today!

Vinyl Flooring
If you want the ultimate in easy to clean, long lasting flooring, go vinyl. These 1/8" thick vinyl mats are molded to the floor exactlylike our carpets & since they cover the floor from door to door &firewall to back wall you have complete interior protection. Pre-cut36 oz. jute fiber is included for the passenger area to increase the amount of insulation against heat, cold & road noise. Remember,vinyl is much more resistant to temperature changes & moisture than rubber, so these mats will last & last. Call us to order yours today!

Introducing a multi-stage, automotive insulation & sound dampening system designed to give you the “quiet riding comfort” found in today’s new trucks.These kits are designed with current state-of-the-art auto acoustic technology, made specifically to insulate & control the noise, vibration &heat in the cab of your classic truck.

Kits are pre-cut & easily installed in a couple of hours with easy to follow illustrated instructions. These kits come with everything you need to do the job right:

• Fully illustrated instructions for an easy, two-hour installation
• Pre-sized sound damper pads
• Pre-trimmed heat absorber/barrier panels
• Spray adhesive & sealing tape

Firewall Covers
These replacement type firewall covers are made of tough ABS plastic. They are more than just a cover, these firewall insulators are rubber molded to look & fit like original equipment, but with thermal insulation bonded to the back which isolates engine heat& noise far better than the original. They arrive ready to install on your firewall, with no holes to drill & no cutting required. Clips are not included but are sold separately & listed below.

Does your lighter light? How about that turn signal lever, does it function properly & then cancel itself when the steering wheel is turned? How do those ashtrays look? Do you have to lift up on the shift lever to activate the neutral safety switch? Never fear, MAC's is here, with lots of switches,bezels, knobs, levers, harnesses, speedometer parts, grommets & more for your pickup. That big beautiful Ford dash just sits there, right in front of your face, every time you get behind the wheel. So brighten the look & restore the proper function of the many gauges,switches, knobs & relays in your dash with brand new quality parts &enjoy your time behind the wheel just a little bit more!

VinylProtectant
Keep that dash pad looking brand new for years to come.Protect your new dash pad from harmful UV rays with our Raggtopp™ vinyl protectant. It’s so easy to use; just spray it on,wipe it dry & you’re done. It is specially formulated to repel dust,dirt & grease, plus it contains no silicones so it’s not slippery to the touch when it dries. Packaged in a convenient 16 oz. pump spray bottle.

Oil Pressure Sending Units
Keeping tabs on the vital fluids in your engine is important. Mostof the time when the dash gauge doesn’t work it’s the sendingunit that is at fault. Remember to use some teflon tape on the threads when you are replacing the sender, (but be sure notto let the tape extend beyond the threads & interfere with the sensor portion of the sending unit!)

Water Temperature Sending Units & Parts
Your little water temperature sending unit has the vital job ofkeeping you informed of how things are going inside the criticalwater jackets of your engine & is your best tool for avoiding a dangerous overheat condition. Be sure that corrosion & age don’tkeep your sending unit from functioning properly & make sure thatall wiring is properly connected & in good condition. Replace thatold unit with a fresh new one, for reliability & general peace of mind.

Instrument Cluster Constant Voltage Regulators
The constant what?? Very few people are even aware that their pickup has one of these until it goes bad. If all the dash gauges read the maximum then this is the culprit. Its job is to feed a constant stream of lowered voltage to your gauges, when it failsthe voltage is allowed to increase & all your needles are peggedto the right. It is located on the back of the instrument cluster.If you have a problem with just one gauge, then it’s likely the sending unit or the dash gauge.

Speedometer Cable Core & Tool Kit
If your cable is broken & no cable assembly is available, installa new core! Just measure your original housing to make sureour 70" core will work. Each kit supplies you with a 0.130"diameter S.A.E., O.E.M. standard, multi-wire coiled cable with0.104" squared end, universal metal tip, spacer washer & tool for attaching the tip to the cable. Simply cut to the required length,attach tip, lubricate & install. See cable lubricant listed below.

Glove Box Liners
Consider yourself lucky if you have any glove box liner at all.They were made of cardboard & didn’t react well when wejammed sunglasses, a couple of pens, some pencils (becausethe pens never worked), air pressure gauges, matches, theowners manual & about 10 maps in there. We have brand new glove box liners, all with stainless steel clips already installed.Order yours today!

Door Window Glass Runs
These door window glass runs start at the vent window, run across the top of the glass, down the back edge of the window &into the door shell. Your glass rides in this channel. When it becomes worn your glass willbe able to move in & out & rattle when you are driving. Keep your windows quiet by installing anew glass run right away!

Hoods
All hoods are shipped in special boxes to avoid damage. Theseboxes are too large to be shipped by U.P.S. & must be shippedby truck directly from the factory. There is a special boxing chargeof $10.00 per hood. The truck delivery charges are C.O.D., which means you must pay truck delivery charges to the driver when delivered. However, the hoods themselves & the special boxing charge must be pre-paid. Boxing charges apply whether shipped or picked up at our store. Truck rates begin at a 100-pound minimum& increase depending on weight & distance from MAC's to your “ship-to” address. Minimum charges are $100.00 & high charges could be $125.00 or more. Trucking companies also charge about$25.00 for a residential delivery & about $25.00 more to notify youby telephone about your delivery, if you request notification.

Fiberglass Front Fenders
MAC's is proud to offer the most expertly crafted fenders available. Only the best fiberglass & the highest quality resinsare used in the manufacturing process. Paying attention tosmall details like rolling the edges of wheelwells to provideadded strength lets you know that we are serious about selling the best made, best looking products on the market today.Please see the Fender Shipping note below.

FENDER SHIPPING NOTE:
Some fenders must be shipped by truck because of their size.All truck freight fees (ranging from $100.00 to $125.00) must be paid to the driver, either cash or money order, on delivery(C.O.D). In addition, the trucking company might also charge for a residential delivery ($25.00) or if you request a telephone noification of delivery ($25.00). The fender itself must be pre-paid & might have a $10 boxing fee.